Recent Jobs
Boiler ignition fault: ionization electrode replacement
A boiler that ignited, cut out after a few seconds and showed a fault code was fixed the same day.
VerdictThe fault was fixed the same day, and the combustion analysis readings were sent to the customer with the service report.

A customer’s boiler in Northgate was igniting in the morning, cutting out within a few seconds and showing a “flame not detected” fault code. We took the fault code over the phone and loaded the parts that might be needed into the van in advance.
Diagnosis and repair
- The gas pressure and fan were checked and found to be working normally.
- The ionization electrode was found to be worn and dirty.
- Once the customer approved the part price, the electrode was replaced and the burner cleaned.
- A combustion analysis was carried out and the gas setting checked.
The old part was shown to the customer, and the boiler’s next service date was noted in the service report.
References
AllOther projects
-
The leak was found in 40 minutes, and the repair was completed by lifting just two tiles. Leak DetectionNon-invasive leak detection in Westfield
-
After flushing, the difference between the top and bottom surface temperatures of the radiators dropped significantly. Radiator FlushingMachine radiator flushing in a 15-radiator duplex
-
The supply and waste lines were replaced in three days, and the pre-closing pressure test was documented with photos. Plumbing ReplacementPlumbing replacement in a 1970s building in Old Town































































