Mergen Demo Plumbing & Heating 29/60
Skip to content

Services

Radiator Flushing

Machine power flushing with a cleaning agent removes sludge, scale and rust from the system, helping every part of your radiators heat up.

  • From 3,200 ₺
  • 2–3 hours (10 radiators)
  • 2 specialists

Get a quote+1 (555) 016-0123

Radiator Flushing

Over time, sludge, rust and scale build up in a central heating system. The usual signs are radiators that are hot at the top but lukewarm at the bottom, rooms that are slow to warm up and a boiler that fires more often. Radiator flushing removes these deposits from the system so heat is spread more evenly through your rooms.

Our method: machine power flushing with a cleaning agent

  • The power flushing machine is connected to the boiler’s flow and return pipes.
  • A cleaning solution that is safe for metal surfaces is added and circulated through the system.
  • Each radiator is flushed individually with directed pressure; the debris is collected in a filter.
  • The system is rinsed with clean water, and an inhibitor can be added on request.
  • The system is bled, the pressure is set and the temperature of each radiator is measured.

Chemical only or machine flushing?

Simply adding a chemical and leaving it to work may not be enough for heavy deposits. We circulate the cleaning agent with a machine and flush each radiator separately. In very old, corroded systems, small leaks can appear after cleaning; we inspect the system before we start and tell you about this risk up front.

When should it be done?

We recommend it roughly every two to three years, or whenever you notice a clear difference in how your radiators heat up. Floors are protected throughout, and shared areas are left clean as equipment comes in and out.

Prices are 2026 starting prices and include tax; the exact amount is confirmed in writing after an on-site assessment, before any work begins.

Frequently asked questions

Will my heating bill go down after radiator flushing?

It helps your radiators give off heat more efficiently; however, consumption also depends on insulation, usage habits and the weather. That's why we don't promise a specific saving.

Do the radiators have to be removed?

No. The machine is connected to the boiler circuit and the radiators stay on the wall. Only badly blocked radiators may need extra flushing through the valve connection.

What happens if there's a leak after flushing?

We fix any valve or fitting leaks caused by the flushing free of charge. If a radiator body is badly corroded, we tell you before we start.

Our team

Specialists offering this service

Frank Mitchell

Senior Combi Boiler Technician

Boiler servicing, fault diagnosis and combustion analysis

Languages:English

View profile

Ben Foster

Plumbing & Underfloor Heating Specialist

Plumbing replacement, underfloor heating, radiator flushing

Languages:English

View profile

Have a question?

Leave your number and our specialist will call you; we'll listen to your needs and give you clear information.

Flowright Plumbing & Heating

Welcome back

Log in to your account; your saved posts and comments are waiting for you.