Our smart home setup: We transformed a rental apartment without renovating
From lighting to a security camera, from the thermostat to curtain motors, we made an apartment smart from top to bottom. Watch the full setup in our video.
When most of us hear "smart home," we picture expensive, complicated systems. To test that idea, we decided to make a rental apartment smart without drilling into walls or renovating anything. We brought the devices we picked for lighting, climate, curtains and security together under a single app. In our video, we walk through every stage of the setup, the mistakes we made and the steps we took to keep the home network safe.
In this article
- Which ecosystem we chose and why
- Problems we ran into during setup
- Securing the home network
Which ecosystem we chose and why
Choosing an ecosystem was the most important decision of the setup. We compared three major platforms on ease of use, device variety and local control support. Since it's a rental, we chose devices that don't require wall mounting and can be attached with adhesive or plugged into an outlet. Picking products that support a shared connectivity standard will make it easier to switch brands later.
In the system we chose, we used smart bulbs for lighting, a thermostat-style AC controller for climate and a removable motor module for the curtains. On the security side, we added door and window sensors and an indoor camera. Knowing we could take all of these devices down and bring them to a new home on moving day was one of our top priorities.

A smart home is only truly smart when it works without you noticing.
Sarah Bennett
Problems we ran into during setup
The first problem we ran into during setup was the wireless signal. Devices in the far corner of the apartment kept losing their connection. The fix was adding a small hub closer to the router. The second problem was that the devices wanted different apps. Things got simpler once we paired them through the shared platform instead of the manufacturers' own apps.
The third problem was our own fault: instead of assigning bulbs to rooms, we forgot to group the devices in each room. As a result, the “living room lights” command turned on only one lamp. Once we sorted out the groups, voice commands worked properly too. Writing down which command you'll use in which room before setup saves time.
Securing the home network
The least discussed but most important topic in a smart home is network security. The first thing we did was change the router's admin password. Then we created a separate guest network for smart devices, keeping computers and phones off it. That way, even if one device is compromised, it's harder to reach our personal files. We also turned on automatic software updates for every device.
| Topic | Smart Home |
|---|---|
| Highlights | smart home, app, cybersecurity |
| Reading time | 9 minutes |
| Written by | Sarah Bennett |
Key takeaways
- Devices that don't touch the walls and can be taken along are ideal for renters.
- A hub fixed the signal problem; room groups fixed the naming problem.
- A separate guest network, strong passwords and automatic updates protected the home network.
For devices with cameras and microphones, we used a strong account password and two-factor authentication. We added a routine that switches the camera to privacy mode when we're home. Choosing whether footage is stored in the cloud or locally also matters. We went with local storage. In our video, we show each of these steps with screenshots.
What do you think about this post?




































































Leave a comment