Mergen Demo Gadget Lab 38/60
Skip to content
YouTubeYouTube content loads when you press play
CybersecuritySmart Home

Secure your home network in 15 minutes: Router settings step by step

Default passwords and outdated firmware leave your home network open to attack. Watch our video as we configure router settings together.

EBEthan BrooksWorld & Environment Reporter
5 min12.1B0
Table of contents
  1. Change the admin password
  2. Encryption and a guest network
  3. Firmware updates and remote access
  4. Key takeaways

Although your home router is the gateway to the internet for all your devices, it is often left with the settings it had on the day it was installed. A default admin password, outdated encryption and un-updated firmware can leave your network vulnerable to bad actors. In our video, we go through every step together, from logging in to the router interface to setting a strong Wi-Fi password. Moving smart home devices to a separate guest network and turning off unnecessary remote access features are also important measures. Just fifteen minutes can make your home network significantly more secure.

Change the admin password

The first step is to log in to the router interface and change the admin password. On many routers, the default username and password are printed on the label on the bottom of the device or are widely known. Type the router's local address into your browser, log in with the details on the label and change the admin password in the settings menu to a long, unique phrase. The router's manual or label is all you need for this.

In the same section, change the Wi-Fi network name too; names that reveal the router model or your name give attackers a clue. Keep the network name ordinary and meaningless. Store the new password in a password manager or somewhere safe. This step takes just two minutes and closes off the most common route of attack.

Change the admin password — Secure your home network in 15 minutes: Router settings step by step

If your router password is still the one printed on the bottom of the box, it's time to change it.

Ethan Brooks

Encryption and a guest network

Wi-Fi encryption should use the newest standard if possible. Check the encryption type in the settings; if old, weak methods are in use, choose the current one. The network password should be at least twelve characters long and mix words and numbers. Simple, predictable passwords can be cracked in seconds. On most routers, this setting is under the security menu.

Turn on the guest network feature to create a separate network for visitors and smart home devices. That way, even if a smart plug or camera is compromised, the computers and phones on your main network can't be reached. Set a separate password for the guest network and turn off communication between devices. Setting a time limit is an optional extra measure.

Firmware updates and remote access

Update your router's firmware. New versions close discovered vulnerabilities; if there's an automatic update option, turn it on. If a firmware update isn't possible, consider asking your internet service provider to replace the device with a newer model. Old routers can stay in use for years without receiving updates, and that's a serious risk. Up-to-date firmware is the easiest way to protect your network against newly discovered threats.

Topic Cybersecurity
Highlights cybersecurity, smart home, how-to
Reading time 5 minutes
Written by Ethan Brooks

Key takeaways

  • Change the admin password and network name first.
  • Current encryption and a separate guest network limit the impact of attacks.
  • Firmware updates and disabling unnecessary remote access are a must.

Finally, turn off unnecessary remote access features. Remote management, UPnP and port forwarding rules you don't use can open a door for attackers. Check the list of connected devices, and if there's one you don't recognize, change the password. After this fifteen-minute set of tweaks, your home network will be significantly more secure. Once you've made these changes, don't forget to check that your connected devices still work.

Share this post

What do you think about this post?

EB
World & Environment Reporter

Ethan Brooks

Ethan Brooks follows international affairs and climate news, bringing his experience covering summits and reporting from the field to Agenda24's world and environment pages. He has also worked on documentaries about conservation and sustainable cities.

Leave a comment

Share your thoughts

Your email address will not be published. Respectful, on-topic comments are approved.

Gadget House

Welcome back

Log in to your account; your saved posts and comments are waiting for you.