In recent years spoon carving has become one of the favorite crafts of people who want to step away from screens. You need very little to get started: a freshly cut piece of branch, a carving knife and a hook knife. In our video, woodworker Henry Dawson shows the whole process, from choosing the right wood and holding the knife safely to moving from rough form to fine detail. He advises not to expect your first spoon to be perfect, and to enjoy the process.
Choosing the right wood
Choosing the right wood is the first and most important step in spoon carving. Henry Dawson recommends freshly cut green wood for beginners, because damp wood carves much more easily than dry wood. Beech, linden, cherry and walnut are popular choices for their soft, straight grain. It's also important that the branch isn't too twisted or cracked.
After choosing the wood, you need to cut a piece that suits the spoon's shape. In the video, Dawson shows why it matters that the grain runs along the length of the spoon's handle; pieces carved against the grain break easily. Choosing a straight branch of medium thickness for your first spoon makes the process easier. A poor branch picked in a hurry can let you down after hours of work.

Wood gets along not with those who rush, but with those who listen to it.
Sarah Bennett
Safe knife grips
Safe knife grips are the most important topic in carving. Dawson stresses always working the knife away from yourself and making sure your other hand is never in front of the blade. The main grips he demonstrates in the video include the thumb-push grip and the chest-lever grip. He explains separately which cut each grip is useful for.
For safety, you should wear a cut-resistant glove, choose a steady, comfortable seat and keep the knife sharp. A dull knife takes more force, which leads to slips and accidents. Dawson recommends stropping the knife at the start and in the middle of every session. Taking a break and drinking some water when you feel tired or distracted is the simplest rule for preventing accidents.
Sanding and oiling
Once the rough shape is done, you move on to fine work. A hook knife is used to carve the bowl and a straight knife to thin the handle. Dawson teaches you to check the spoon's thickness with your fingers and to hold it up to the light to make sure it's even. Working patiently with thin shavings keeps the wood from tearing and leaves the surface smooth.
| Topic | Craft |
|---|---|
| Highlights | handmade, sustainability, creative process |
| Reading time | 7 minutes |
| Written by | Sarah Bennett |
Key takeaways
- Green, straight-grained wood is the easiest material for a first spoon.
- Cutting away from yourself and keeping the knife sharp reduce accidents.
- Thin shavings, sanding and plant oil finish the surface.
The last stage is sanding and oiling. The surface is smoothed first with medium and then fine sandpaper, and the spoon is left to dry. Then a thin coat of food-safe plant oil, such as flaxseed or walnut oil, is applied. Dawson advises not expecting your first spoon to be perfect; small flaws give character to a spoon that bears the mark of your hand.
What do you think about this post?




































































Leave a comment